Intelligent Energy Management
PROTECT THE ENVIRONMENT AND SAVE ENERGY WITH COMPRESSED AIR
Greenhouse effect, the deteriorating ozone layer and the planet’s changing climate are just a few of the issues that have interested public opinion in recent years bringing environmental protection and energy saving to light. Companies who rationally produce and use compressed air can contribute to environmental protection through energy savings, as well as decreasing their operation costs. Many public agencies around the globe have established awareness campaigns aimed at compressed air users. Mattei, as a compressor manufacturer, is also fully aware and involved in environmental aspects and has based its research on the improvement of its compressors’ efficiency in order to offer a greater saving on energy.
COMPRESSED AIR COST
The diagram refers to one 60 HP (45 kW) compressor installation, 5 year depreciation, 4,000 hour/year, operating pressure 102 psig (7 bar).
ENERGY COSTS ARE MORE RELEVANT THAN THE INITIAL INVESTMENT
The energy cost of a compressed air installation can reach 80% of total costs. All other costs such as ordinary and extraordinary maintenance or the buying cost are relevant but become secondary when compared to electric energy as illustrated in the diagram. The diagram underlies a clear truth: even a small percentage of saving in energy will produce important economic benefits.
The true quality of an air compressor is given by its specific energy or efficiency, which identifies the energy needed to produce a given quantity of compressed air.
Specific energy is the result of the following formula: kW/(m³/min) where kW stands for the absorbed power, that in a three-phase system is calculated as indicated below:
EVALUATING EXACT NEEDS
It is thus extremely important to know the exact air needs of the user, together with the depreciation period and all other variables that will help to determine the alternative with the lowest energy consumption. To determine exact air demand Mattei’s technical staff is at your disposal to analyze your compressed air needs. This analysis involves the recording of current energy consumption on a daily or weekly basis.
TYPICAL USER PROFILES
Profile n. 1
This profile represents an application with an eight-hour shift at constant consumption for five days a week. Air demand tends to stay around 90% of maximum requirement.
Profile n. 2
This is represented by a unit running for 16 hours a day and 5 days a week. Air consumption varies from 70 to 100% of maximum air demand.
Profile n. 3
The unit runs 24 hours on for 7 days a week with consumption variability between 70 and 100%.
A central aspect for the evaluation of a compressed air plant’s economic operation is the concept of regulation.
This regulation maintains the line pressure within a range of minimum and maximum pressure set by the pressure switch and the compressor may stop and restart according to air demand.
When the pressure reaches the maximum value the compressor will run off load with the immediate closure of the intake valve and the start of the decompression phase.
The best compressors absorb 20-25% of full load power during off load operation. When the minimum pressure is reached the compressor operates full load with the immediate opening of the intake valve. In order to avoid frequent stops and starts, which can damage the asynchronous three phase electric motors, a receiver is normally installed.