34 through 328 SCFM. Mattei’s AC Series sets a new standard in air compressors with sophisticated high-efficiency performance, quiet dependable operation and low maintenance. Featuring quiet (as low as 66 dB(A)) cabinet enclosures, electronic controllers, energy saving soft-start Wye-Delta motor starters, premium efficiency TEFC motors, air-cooled aftercoolers and optional integrated refrigerated air dryers, to deliver unbeatable performance and energy savings.
GET MORE FOR LESS
Featuring our most advanced airend designs, AC Series must be compared on an SCFM basis – not based on HP. Why? Our AC Series produces more SCFM per HP than typical rotary screw air compressors. So, to do a fair comparison you usually need to select the next smaller size. In fact, it is not uncommon to select a smaller HP AC Series model to meet your air demands.
For example, say you need about 130 SCFM. Mattei can offer you our traditional 30 HP ERC Series model (129 SCFM) or, we can offer you our 25 HP AC Series rated at 130 SCFM. Each produces about the same volume of air, but that 5 HP difference saves you money the moment you turn it on, month-after-month, year-after-year.
Mattei is friendly to your wallet and the environment, too. Each unit holds very little lubricant (typically less than half that of a rotary screw air compressor) which saves you a small fortune on oil changes and disposal costs. The oil filter is cleanable – yes, cleanable. The highly efficient mechanical air/oil separation chamber delivers high quality air to the air/oil separator filter thus, it sees very little lubricant and provides up to 10,000 hours of service, and low 1-3 ppm oil carryover.
Available in 200, 230, 460, 575v/3Ph/60Hz.
CONDENSATE DRAIN AND SEPARATOR KIT
The kit includes a condensate separator and a timed electronic drain.
Thanks to the thoroughness these compressors were designed with, the energy consumption per kW/100 CFM is among the lowest in the industry. The regulation system is continuous and automatic with off-load operation and allows a very economic adaptation to the installation demands.
These compressors are designed for industrial use 24 hours a day and 12 months a year at constant pressure. Mattei compressors’ running often exceeds 100,000 working hours, as evidenced by our Revolutionary 10 Year Warranty.
AC Series compressors are cabinet enclosed machines that operate at a constant 1,800 rpm and deliver sound levels as low as 66 dB (A).
Much like the connecting rods on your engines crankshaft, the heart of the Mattei rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. Screw type compressors use up to six (6) radial and thrust bearings engineered for only 50,000 hours (ASME B-10) of life.
The exclusive three-stage oil separating system guarantees a maximum oil carry-over in the air lower than 3 ppm. Moreover, the air cooled aftercooler ensure approach temperatures of 18°F or less.
High efficiency totally enclosed fan cooled (TEFC) electric motors is standard on AC Series.
This is obtained with a flexible coupling between motor and compressor, without any need for belts. It is without gears or roller bearings needing maintenance.
Energy saving Wye-Delta motor starters is standard on AC Series.
Air cooled aftercooler with 18°F approach temperature. Moisture separator with automatic drain valve is optional on AC Series.
Maintenance operations only include changing the oil at predetermined intervals, cleaning or replacing the air filter and cleaning the radiator. Benefit from half the oil volume of rotary screw types, and oil separating filters that can reach 10,000 working hours, for significant savings over the life of the machine.
CAPACITY CONTROLS ADAPT TO YOUR DEMANDS
The layout and design of every air system is different. Thus, Mattei provides a variety of control schemes as standard to better adapt to the demands and dynamics of your system, to save energy and prevent short-cycling and ambient oil misting problems created by inflexible control schemes and underutilized compressors.
MODULATION OPERATING MODE AT CONSTANT PRESSURE
Thanks to a modulating proportional intake valve that supplies air at constant pressure, these compressors can even work without air receivers. This method automatically adapts to system demands and is ideal for applications with little storage or continuous high air demands.
AUTOMATIC ON LOAD / OFF LOAD
Load/Off Load maintains line pressure within a minimum/maximum pressure range, and the compressor may stop and restart according to air demand. Ideal for applications with adequate air storage tanks or large variations in air demand.
COMBINED ON/OFF LOAD AND MODULATION REGULATION
This regulation allows Mattei compressors to modulate within a set pressure range (for example, ± 4-5 psi). Should the air demand decrease, the compressor will off-load and stop, with evident energy savings. Ideal for applications with little storage and large variations in demand.
5 HP and 7.5 HP models are equipped with the MicoC controller.
Models 10 HP and larger are equipped with an exclusive state-of-the art computerized controller, Maestro XS.
Maestro XS, automatically controls, monitors and programs the unit’s operation, and has an option to connect to a PC for a remote control. If connected to other compressed air packages equipped with Maestro XS, the unit can become master of a compressed air plant, thus saving on the installation of a superior controller. Maestro XS can be interfaced via web or cellular technology to provide remote service monitoring.
HIGH-EFFICIENCY AIR INTAKE FILTER KIT
Heavy-duty high efficiency air intake filter is an option for dirty, dusty environments. Removes solid particles > 3μ with a filtering efficiency up to 99%.
Mattei even delivers superior value for your money with AC Series compressor packages from 5 thru 15 HP mounted onto 90 gallon air receiver tanks. Our 90 gallon tanks give you more than 10% extra energy saving air storage than common 80 gallon tanks.
INTEGRATED REFRIGERATED DRYER
Integrates a refrigerated dryer into cabinet. Reduces installation costs and space requirements.
OIL-WATER SEPARATOR KIT
Oil-water separator is fitted inside the cabinet, to ensure separation of oil from the condensate drain water. (Models AC 15 and larger)
CONVERTING SERIAL BOARD
Allows communication with the protocol converter. One serial board is required for each compressor. (Models AC 15 and larger)
INTEGRATED HEAT RECOVERY KIT
Plate type oil/water heat exchanger, thermostatic valve and connecting pipes mounted inside cabinet. Ideal for hot liquid process applications. (40 HP and larger)
SOUNDPROOFING INTAKE AIR DUCT
Fitted externally to the intake end of the cabinet. Reduces the sound pressure level by about 3 dB(A). (Models through 30 HP)
AIR TREATMENT PRODUCTS
Mattei offers comprehensive air treatment accessories to complete your air system including: in-line coalescing filters, refrigerated air dryers, desiccant air dryers, sterile in-line filters, air receiver tanks, timer and demand style condensate drains, and oil/water condensate separators.
2. Automatic Intake Valve
3. Oil Chamber
4. Compression Chamber
5. Oil Cooler
6. Oil Filter
8. Compressed Air
10. Coalescing Filter
11. Oil Return Valve
12. Minimum Pressure Non Return Valve
The air is drawn in by means of a filter and passes through a modulating proportional valve that regulates the air delivery according to the demand. This valve automatically maintains the working pressure at constant levels.
Therefore, the air enters the compression chambers or vanes that the stator, the rotor, the vanes and the covers have formed. This rotor is installed eccentrically to the stator and is equipped with longitudinal grooves in which the blades slide. It is the centrifugal force that pushes the blades against the stator’s wall.
An efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator’s inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades.
Air compression is triggered by the volume reduction of the vanes in the stator during rotation. By passing through mechanical and coalescing separation stages, the mixture of compressed air and oil is purified until the maximum oil carry-over in the air does not exceed 3 ppm (parts per million).
Finally the air is cooled in the radiator and the condensate is eliminated by a condensate drain.